Skip to content
New! Lower Shipping Charges and Free Shipping on Orders of $75 or More!
New! Lower Shipping Charges and Free Shipping on Orders of $75 or More!

GBC012 Boost OBD-II Settings Keeper - Discontinued

by NOCO
Sold out
$18.95
SKU GBC012

Notify me when back in stock

Boost OBD-II Settings Keeper The GBC012 OBD-II 12V Boost Settings Keeper allows you to disconnect your vehicle's battery without losing onboard electronic settings, such as radio and clock settings, seat positions, alarms, GPS, keyless entry codes and more. It's simple to use. Just connect the OBD-II 12V Boost Settings Keeper to the XGC 12-Volt Out Port on a GB70 or GB150 Ultra Safe Lithium Jump Starter and power on the jump starter. It features a Type-A OBD-II 16-Pin diagnostic connector for vehicles with a 12-volt supply voltage per SAE J1962 specification.
• DANGER: NEVER START A VEHICLE OR CHARGE THE VEHICLE’S BATTERY WHILE CONNECTED. WHEN USED IMPROPERLY AND/OR AGAINST RECOMMENDED USE, IT MAY RESULT IN PROPERTY DAMAGE, SERIOUS INJURY, OR DEATH. Always turn off as many electrical loads as possible before using. (ie. Headlights, AC, Radio, etc.)
• WARNING: This product is fused at 10 Amps. Always check with the vehicle manufacturer to verify the maximum current supported through the OBDII port. Do not use if the vehicle’s OBDII fuse is below 10A and/or shares a fuse with the ECU or other sensitive equipment.
• Maintains onboard vehicle computer systems; perfect when disconnecting the battery or making battery changes.
• Works through the XGC OUT port on NOCO GB70 and GB150 Jump Starters.
• Compatible with any OBDII port (All vehicles built after 1995)
• Maintains voltage continuity to vehicle onboard computer; retains clock, radio, and seat memory.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)